Ion-exchanger colorimetry-II microdetermination of chromium in natural waters

Ion-exchanger colorimetry for chromium(VI) with 1,5-diphenylcarbohydrazide has been developed for the determination of chromium at mug/l. concentrations in natural water samples. About 90% of the chromium(VI) in a 1-litre sample solution is concentrated in 200-400 mesh Dowex 50W-X4 resin within half an hour. It is possible to obtain higher sensitivity by employing a larger amount of sample solution. Total chromium can be determined by oxidizing chromium(III) to chromium(VI) with ceric sulphate.     

Synthetic study of optically active 3-azabicyclo[3.3.0]octane-2,6,8-tricarboxylic acid

Synthesis of (1R,2S,5S,6R,8S)-3-azabicyclo[3.3.0]octane-2,6,8-tricarboxylic acid (2) from trans-4-hydroxy-L-proline (5) was attempted. A Diels-Alder reaction of 3,4-dehydroproline derivative 9 and cyclopentadiene afforded a single stereoisomer 11. The Diels-Alder adduct was smoothly converted to the hydrochloride of 2 (24) via RuO(4) oxidation. Although some racemization of the material or product was observed during the synthetic processes, the amino acid 24 proved to be optically pure.     

Development and prevalidation of a method for phenol determination by solid-phase spectrophotometry

A simple, sensitive and rapid solid-phase spectrophotometric procedure was developed for the determination of traces of phenol with 4-aminoantipyrine as a reagent (AAP-SPS), and the optimal experimental conditions were established. This method was performed by sorption and direct absorbance measurements of the product phenol-AAP sorbed on the anion-exchanger Dowex 1-X4 (0.2 g) at 495 nm (absorption maximum) and 700 nm (non-absorption wavelength). The sensitivity offered by the AAP-SPS procedure was higher by a factor of 40 compared with the respective conventional spectrophotometric method. Metrological characteristics were established using a prevalidation strategy. The AAP-SPS procedure is characterized by a linear calibration function in the working range of 0.05–0.50 μmol, low standard deviation of procedure (±0.012), low limit of determination (0.021 μmol), and favorable random (±0.85 to ±11.27%) and systematic deviations (−4.55 to +11.50%). Moreover, the accuracy of the system investigated by the recovery test is acceptable (99–102%). Favorable working and performance characteristics make the new SPS method ideal for phenol monitoring in pharmaceutical preparations as well as other matrices.     

Response Characteristics of a Glucose Electrode with a Sensing Membrane Prepared by Plasma Polymerization

A glucose electrode was composed of a dissolved oxygen electrode and an immobilized glucose oxidase membrane prepared by plasma polymerization of propargyl alcohol as a monomer. Fairly good precision of the electrode response to sample solutions was obtained by measurements using the steady-state method or the reaction rate method. Activity of the glucose oxidase immobilized within the membrane and mounted on the electrode lasted for 50 consecutive measurements over 5 days, and, if the membrane was stored in a buffer solution of pH 7.0 at a temperature of 0°C, the activity was preserved for more than 2 months. Such immobilization of the glucose oxidase with the plasma polymer effectively suppressed interference from Cu²⁺ions, which would seriously interrupt oxidation of the glucose in homogeneous solutions, in the sample solutions.     

Ion-exchanger colorimetry-VII Microdetermination of iron(II) and iron(III) in natural water

A trace method for iron, based on ion-exchanger colorimetry, has been developed. 1,10-Phenanthroline is used as the colour reagent for iron(II) and citrate as the masking reagent for iron(III). Total iron can be determined after reduction of iron(III) to iron(II) with hydroxylamine. It is possible to determine iron at mug/l.-levels in different oxidation states in natural waters.     

Diastereoselective synthesis of the 19-epi-C18-C25 segment of (−)-lasonolide A and an unusual inversion at C19

Diastereoselective construction of the 19-epi-C₁₈-C₂₅ segment of (−)-lasonolide A was achieved using a 5-exo-trigonal mode of radical cyclization for the creation of the contiguous quaternary and tertiary stereogenic centers at C₂₂ and C₂₃ as the key reaction step. During the dehydration stage, it was found that an unusual inversion of configuration took place.     

A novel glycosylation concept; microwave-assisted acetal-exchange type glycosylations from methyl glycosides as donors

Efficient microwave-assisted glycosylations from methyl glucopyranosides are described. We have discussed the effects of microwave irradiation on this unique glycoside exchanging reaction from view points such as amount of Lewis acid promoters and acceptors, hydroxyl protecting groups of methyl glucopyranosides donors for reactivity, and neighboring effect.     

Ion-exchanger colorimetry-VIII Microdetermination of copper in natural waters

A microdetermination method for copper by ion-exchanger colorimetry has been developed. The porphyrin alpha,beta,gamma,gd-tetrakis(4-N-methylpyridyl)porphine was used as the colour reagent. After the complexation at pH 4.5 and 40 degrees , the surplus ligand was converted into the protonated species by addition of sulphuric acid. The complex and the ligand were easily sorbed on the cation-exchange resin, Dowex 50W-X2-H(+) (100-200 mesh). The resin-phase absorbances of the complex species at 424 nm and of the resin background at 510 nm were used for the measurements. There were no interferences by the foreign ions expected to be present in natural waters, at up to 1000 times the concentration of copper. With a 1 -litre sample the detection limit is 0.072 mug/l. It is possible to determine copper at mug/l. or lower levels in natural waters.     

Preparation and properties of SiO2-TiO2 thin films from silicic acid and titanium tetrachloride

The preparation of SiO₂-TiO₂ thin films by the sol-gel method using silicic acid and titanium tetrachloride as starting materials was studied. The homogeneous sols were obtained by the condensation reaction of silicic acid with titanium tetrachloride in methanol-tetrahydrofuran. The dipcoating of slide glasses and silicon wafers followed by heat treatment gave oxide thin films of 88–93% transmittance, 3000–4500 Å thickness, and 1.45–1.80 refractive index, depending on heat-treatment temperature and TiO₂ content. FT-IR measurement showed that the Si-O-Ti bond is formed even in the sol and films. The variations of film thickness and refractive index on transformation from the gels into the oxides were found to be quite low.     

Ion-exchanger phase absorptiometry for trace analysis

Ion-exchanger phase absorptiometry is based on the direct measurement of the degree of light-absorption by an ion-exchange resin phase which has sorbed a sample component. Direct application of the method makes it possible to determine trace elements in natural water samples without preconcentration. In this paper, all systems hitherto developed are reviewed and the theoretical background of solid-phase absorptiometry is described.